How to check and maintain the fast rolling door in normal use

　　Everyone knows that if the fast rolling door can be properly maintained, it will help to extend the service life of the fast rolling door. So, how to check and maintain the fast rolling shutter door in normal use? Xinyi Door Industry believes that the following points should be done.

　　1. Check and maintain the position of the fast rolling shutter door that is prone to potential safety hazards, keep some parts of the mechanical rotating parts with sufficient lubricant to provide lubrication, avoid mechanical wear between parts, and extend the service life of parts.

　　2. The exterior of the motor should be kept clean, and the air inlet should not be hindered by dust, fibers, etc.

　　3. The dirt on the surface should be scrubbed with a soft cotton cloth. It is easy to scratch the exterior with a hard object. When there is too much dirt on the fast rolling door, you can use cleaning agents, toothpaste, special cleaning agents, etc. to clean it.

　　4. During the operation of the fast rolling shutter door , the operating staff shall not leave the operating place without authorization, and shall pay close attention to the opening and closing conditions and implementation. During the opening and closing, no one is allowed to stand or move around. In order to prevent the trip switch from malfunctioning, the shutter is stuck, the motor is blocked and other accidents occur.

　　5. The fast door that does not open and close for a long time must be maintained once every six months. The content is to eliminate dust, paint, and add lubricant to the sprocket roller chain of the transmission part.